(Click the banner above if you do not see a navigation menu to the left)

Using the ScopeTronix "Digi-T" System

*Patent Pending - Dealer Inquiries Invited

The Digi-T System includes the Digi-T ring, a step ring to fit your camera, a hex wrench for installation, and instructions. Some kits may also include a second step ring, a lens tube, or a snap-on adapter depending on camera model.

It's easy as 1-2-3...

Step 1. Remove the rubber eyeguard from your eyepiece and install the Digi-T Ring onto the eyepiece using the three allen screws.

Step 2. Thread the Step Ring onto the Digi-T Ring.

Step 3. Thread the eyepiece and Digi-T System into the threads of the camera lens.

Now you're ready to take some astro-images!

For added security, we recommend you tether your camera to the telescope using your camera strap....just in case you accidentally loosen a set screw when you meant to focus ; )

Back to the Digital Camera Page