(Click the banner above if you do not see a navigation menu to the left)
(Click the banner above if you do not see a navigation menu to the left)
Other Digital Camera Adapters
ScopeTronix 7-21mm Zoom Eyepiece / Adapter
You don't need to spend a fortune to get a decent zoom eyepiece. The ScopeTronix 1.25" zoom eyepiece features fully multicoated optics, a flip down rubber eyeguard, and is threaded for filters. The zoom ranges from 7mm to 21mm and it is near parfocal throughout the zoom range. We offer a 28mm digital camera adapter for use with many Nikon Cameras such as the 800/900/990/995/4500. The adapter is attached by simply pulling off the rubber eyeguard, slipping on the adapter and tightening 3 thumbscrews. We also offer adapters to allow use with other cameras such as the Nikon 880/885/5000, and 37mm Sonys. The Adapter/Eyepiece combination is then threaded directly into the camera. Some cameras may require a lens tube (Nikon 800/880/5000), or 37mm adapter ring (most 37mm Sony). Please note that Zoom eyepieces are somewhat of a compromise when used with digital cameras. They are convenient but if you want the highest possible picture quality with the least vignetting we suggest you look at our 14 & 18mm Wide Angle Eyepieces. Please call for Adapters for other Nikon Cameras.
| Description | Item # | Price | Add to Cart |
| ScopeTronix 7-21mm Zoom Eyepiece | STZ721 | $59.95 | |
| 28mm Digital Camera Adapter for use with STZ721 | STAVIEW28 | $34.95 | |
| Step Ring for using STZ721 with 37mm Cameras [Note: AVIEW28 also required] | STR2837 | $22.95 |
1.5" Uni-T (left and center), 2.5" Uni-T pictured on Ziess
Spotting scope eyepiece (right).
Uni-T™
Adapter
These digital camera adapters will fit many odd optical devices. Great for microscopes, borescopes, .96" eyepieces, large spotting scope eyepieces, etc. The six nylon thumbscrews won't mar the finish. The 1.5" Uni-T can handle eyepieces with an outside diameter from .25" to 1.5". The 2.5" Uni-T can handle eyepieces with an outside diameter from 1.5"-2.5". Both Uni-T sizes are "T" threaded on top, you will need the appropriate step rings or adapters to connect it to your camera (see our attachment kits). Tip: If you always use the same eyepiece you can quickly and easily remove/install your Uni-T by always using the same upper and lower screw. Once adjusted the first time, the adjustment will stay the same.
| Description | Item # | Price | Add to Cart | |
| 1.5" Uni-T Adapter | STUNIT | $34.95 | ||
| 2.5" Uni-T Adapter | STUNIT25 |
$39.95 |
T-Threaded
Eyeguard
(Left) T-Threaded eyeguard - (Right) Shown on a Digi-T equipped eyepiece.
A nice accessory for the Digi-T system. This handy "T" threaded eyeguard allows Digi-T owners to leave the Digi-T ring permanently in place on the eyepiece and quickly thread on an eyeguard for visual use.
| Description | Item # | Price | Add to Cart |
| ScopeTronix T-Threaded Eyeguard |
STDTEG
|
$22.95 |
ScopeTronix Adaptaview™
The Adaptaview U is a strong, light-weight machined aluminum ring with .75mm male T threads on top and three steel securing screws around the bottom. The ring is placed on top of the eyepiece (after the rubber eyeguard has been removed from the eyepiece). The three securing screws are then fastened finger-tight. The eyepiece is now transformed into its own eyepiece projection adapter assembly.
This adapter is very versatile and will fit most eyepieces with a removable rubber eyeguard and a top diameter (with the eyeguard removed) of less than 1.75". It is known to fit the following eyepieces: Tele Vue 32mm Plössl, 40mm Plössl, 55mm Plossl, all Nagler Type 2's and Type 4's, all Panoptics, and Radians. It also fits Televue and Vixen Zoom eyepieces and the following Meade eyepieces: UWA-8.8mm and 14mm, SWA-24.5mm, 32mm, 40mm and 56 Super Plossl. Useful for both 35mm and digital cameras (for digital camera use the eyepiece must have good eye relief to minimize vignetting). This unit is equipped with a standard male "T" thread on top.
For even more Adaptaviews, Click Here
| Description | Item # | Price | Add to Cart |
| Adaptaview U | STAVIEWU | $39.95 |
ScopeTronix Digadapt™
The first universal eyepiece projection adapter designed especially for digital imaging. The special design allows the adapter to collapse much further than conventional projection adapters allowing the close afocal coupling necessary to reduce vignetting. The adapter is "T" threaded, use the proper step ring to mate it to your digital camera or use a T-Ring to mate it to your 35mm camera. Note: To use an eyepiece with this adapter it must not exceed the following dimensions: maximum diameter of top - 42mm, maximum height of top - 49mm, maximum overall length of eyepiece - 80mm.
| Description | Item # | Price | Add to Cart |
| ScopeTronix Digadapt | STDADPT | $69.95 |
This is simply the finest and most universal eyepiece projection adapter money can buy. Works with digital and film cameras. Its patented mechanism will securely fasten onto virtually any eyepiece with an outside diameter between 1" and 2". Great for telescopes, microscopes, binoculars, monoculars, spotting scopes, field scopes, and night vision gear. Simply place it over the eyepiece and equally tighten the 2 thumbscrews for a secure fit. The top of the Uni-Adapt™ is "T" threaded so you will also need the appropriate T-Rings or adapters to attach it to your particular camera (see our Step Rings or Digi-T kits on this page).
| Description | Item # | Price | Add to Cart |
| ScopeTronix Uni-Adapt | STUADPT | $169.00 |
C Mount
for Video Cameras
This C Mount adapter allows you to connect any "C" or "CS" mount video camera (typically these are used as security cameras) to your telescope at prime focus. It fits into a standard 1.25" eyepiece port and is threaded for filters.
| Description | Item # | Price | Add to Cart |
| C Mount for Video Cameras | STC125 | $22.95 |
ScopeTronix "C" to "T" Adapter
This adapter will allow you to connect a "C" mount video camera to a "T" Mount thread. Useful for connecting security type cameras to any "T" threaded adapter. Top thread is male "C" (1"), bottom thread is female "T" (42mm). Also fits "CS" mount cameras.
|
Description |
Item # |
Price |
Add to Cart |
|
ScopeTronix "C" to "T" Adapter |
STCT |
$29.95 |
Step Rings for Digital Cameras
 |
 |
 |
 |
|
28mm to T Step Ring |
28mm to 37mm Step Ring |
37mm to T Step Ring |
49mm-T, 41-37mm & 41-49mm Step Rings |
These adapters are designed for digital cameras with a
threaded lens mount. The 28mm to T-ring and 49mm to T-ring adapters allows
you to attach T threaded accessories directly to your digital cameras lens.
The 28mm to 37mm Step Ring adapter allows you to use 37mm threaded photo accessories
with digital cameras that have a 28mm lens thread. There are a large selection
of 37mm photo accessories available (such as Wide Angle, Tele, and Close-up
lens, filters, polarizers, etc.). The 37mm to T-ring adapter allows you to
mount T threaded accessories on the 28-37mm Step Ring above, or directly to
a digital camera with a 37mm diameter lens thread. All
adapters are precision machined on CNC lathes and feature a anodized black
finish.
| Description | Item # | Price | Add to Cart |
| 28mm to T Step Ring | STR28T | $30.95 | |
| 37mm to T Step Ring | STR37T | $30.95 | |
| 41mm to 49mm Lens Tube | STR4149 | $30.95 | |
| 43mm to T Step Ring | STR43T | $30.95 | |
| 46mm to T Step Ring | STR46T | $30.95 | |
| 49mm to T Step Ring | STR49T | $30.95 | |
| 52mm to T Step Ring | STR52T | $30.95 | |
| 55mm to T Step Ring | STR55T | $30.95 | |
| 58mm to T Step Ring | STR58T | $30.95 | |
| 62mm to T Step Ring | STR62T | $30.95 |
Eyepiece Projection Camera Adapter
Our inexpensive camera adapter fits into any 1.25" eyepiece port and can hold a moderately sized eyepiece within it for eyepiece projection photography. The eyepiece upper barrel can be no larger than 1.5" in diameter and no longer than 1.4" in length. Unlike "Prime Focus" astrophotography where you are just using the telescope as a large camera lens "Eyepiece Projection" allows you to increase the power by inserting the appropriate eyepiece into the adapter. You can also unscrew the nose and connect it directly to a T-Ring for "Prime Focus" shots.
Requires a T-Ring Adapter (Above) to fit your brand of digital camera.
| Description | Item # | Price | Add to Cart |
| Eyepiece Projection Camera Adapter | STCAM | $22.95 |
CrystalVue Optics Sharp Shooter
8x32mm Monocular and Digital Camera Lens
This item operates as a standard 8x32mm monocular, but remove the rubber eyeguard and you also have a telephoto lens for your digital camera. Underneath the eyeguard you'll find a step ring that permits you to thread the monocular into either a 28mm or 37mm camera lens. This turns your digital camera lens into a powerful telephoto unit. You'll take up-close pictures of objects that you barely noticed using the camera's normal optical zoom.
| Description | Item # | Price | Add to Cart |
| CrystalVue Optics Sharp Shooter 8x32 Monocular and Digital Camera Lens | CVOSS | $149.00 | |
|
CrystalVue Optics Sharp Shooter 8x32 Monocular
for Kodak DC280, DC3400, DX3600 and others w/37mm Threads
|
CVODC | $149.00 |
CrystalVue LX 8x Monocular
The CrystalVue LX is an 8x monocular designed for both visual and photo use. The eyepiece has a removable eyeguard that reveals a T-thread, which can be used to attach a digital camera. The center ring on the CrystalVue LX can allow the entire scope to rotate so you can properly orient the camera. A retaining screw ring on the eyepiece can also be used for this purpose and for added security. Filters with a 55mm thread can be attached to the end of the monocular by an included step ring. Also included are a carrying case and tabletop tripod. Please check our Attachment Kits page for the appropriate adapter for your digital camera.
| Description | Item # | Price | Add to Cart |
| CrystalVue LX | CVLX | $189.00 |
