ScopeTronix IR Blocking Filter

   Webcams do a great job of imaging, but they are too sensitive in the IR range. The original lens on your webcam contained an IR filter but that lens must be removed for best use with a telescope. Without an IR cutoff filter IR light can overwhelm the sensor causing blooming and over exposed areas of the image. These quality IR cutoff filters block the IR from your CCD chip allowing you to take better images with the proper exposure based on visible light. They have standard 1.25" filter threads so they thread directly into the bottom of our webcam adapters (or into the bottom of 1.25" eyepieces for eyepiece projection astrophotography). Also useful for other CCD imagers.

Description	Item #	Price	Add to Cart
ScopeTronix IR Blocking Filter	STIRBL	$36.95

ScopeTronix 12mm to "T" Adapter

    This adapter will allow you to mount most popular 12mm threaded webcams to any "T" threaded adapter such as a T-Mount, MaxView 40, Digi-T, etc. Allows you to use an eyepiece projection adapter or conveniently connect to a "T" threaded mount at prime focus. Top thread is male 12mm, bottom thread is female "T" thread (42mm). Works with everything that the Webcam Adapter #1 fits (see above).

MaxPower for Webcams

   Telenegative amplifier lens threads directly into the filter threads on our 1.25" webcam adapters and increases magnification by 60% (1.6x). Great for getting more magnification without losing too much of the field of view. It also increases your backfocus, allowing you to reach focus on most reflectors and refractors that don't have enough focus range to focus a webcam at prime focus.

C Mount for Video Cameras

This C Mount adapter allows you to connect any "C" or "CS" mount video camera (typically these are used as security cameras) to your telescope at prime focus. It fits into a standard 1.25" eyepiece port and is threaded for filters.

ScopeTronix "C" to "T" Adapter

    This adapter will allow you to connect a "C" mount video camera to a "T" Mount thread. Useful for connecting security type cameras to any "T" threaded adapter. Top thread is male "C" (1"), bottom thread is female "T" (42mm). Also fits "CS" mount cameras.